联系方式 联 系 人:宏钲营业部 联系电话:021-52584926 biye77@gmail.com 传真电话:021-52584992
真空泵|压缩机
小型泵|叶片泵
离心泵|涡流泵
柱塞泵|磁力泵
软管泵|移动泵
插桶泵|手提泵
潜水泵|曝气机
计量泵|加药装置
螺杆泵|单螺杆泵
阀门|压力传感器
罗茨风机|离心风机
搅拌机|潜水搅拌机
PH/ORP计|仪器仪表
气动隔膜泵|双隔膜泵
污水泵|化工泵|过滤机
凸轮泵|转子泵|齿轮泵
压滤机|污泥脱水机|船用系统
工业设备总汇
大电流发生器
上海宏钲机械设备有限公司-综合机械
上海宏钲机械设备有限公司-化工
上海宏钲机械设备有限公司-环保
上海爱思科机械设备有限公司
产品搜索:
首页
>>>
产品目录
>>>
离心泵|涡流泵
更详细的产品分类
德国 SPECK 离心泵
意大利 LOWARA 离心泵
日本 Nikuni 尼克尼 涡流泵
日本 Ebara 荏原 泵
日本 日立 泵
意大利 Itur 泵
丹麦 格兰富 泵
美国 Gusher 泵
意大利科沛达 CALPEDA 离心泵
产品图片
产品名称/型号
产品简单介绍
centrifugal pump
centrifugal pump
ProductSimpleIntro "centrifugal pump PFT 離心泵 單相/三相 馬達: 1.2 HP 材質: aluminium 出入口連接處: G 1 ¼ 軸封: 機械軸封 尺寸: 長 370 mm 寬 177 mm 高 262 mm 介質: e.g. 水, max. 40 °C "
C 开式叶轮离心泵
C 开式叶轮离心泵
C 开式叶轮离心泵
C 开式叶轮离心泵
C 开式叶轮离心泵
C 开式叶轮离心泵
C 开式叶轮离心泵
C 开式叶轮离心泵
C 开式叶轮离心泵
centrifugal pump 离心泵
centrifugal pump
ProductSimpleIntro"centrifugal pumpPFT 離心泵 單相/三相 馬達: 1.2 HP 材質: aluminium 出入口連接處: G 1 ¼ 軸封: 機械軸封 尺寸: 長 370 mm寬 177 mm高 262 mm 介質: e.g. 水, max. 40 °C "
C 开式叶轮离心泵
C 开式叶轮离心泵
ProductSimpleIntro C 开式叶轮离心泵
smith 液化二氧化碳泵
smith 液化二氧化碳泵
smith 液化二氧化碳泵 MC-1044 MC-1044H MC-2, MC-2H MC-2Q The model MC-1044 pump incorporates the balanced 3-gear design to maximize efficiency and minimize slippage. The MC-1044 is reversible with proper consideration of inlet and outlet ports. The MC-1044 can fill up to three 100 lb. cylinders in 4 minutes using a manifold arrangement. As with all Smith pumps, no periodic maintenance or lubrication is required. Since the pump loading is balanced and no heavy rotor is utilized, the mechanical shaft seal ball bearing sees minimal work. It is sealed for life and does not require periodic greasing. PUMP SPECIFICATIONS PUMPS ONLY AVERAGE DELIVERY RATE GPM MAXIMUM DIFFERENTIAL PRESSURE INLET/OUTLET SIZE: FEMALE THREADED MOTOR PUMP ROTATION AS LOOKING AT PUMP SHAFT-END MODEL 40 PSID, 1800 RPM 75 PSID, 1800 RPM PSI INCHES H.P. MC-1044 17 14 125 1-1/2 1-1/2 H.P. TO 40 PSID 2 H.P. OVER 75 PSID REVERSIBLE MC-1044H 30 25 125 1-1/2 2 H.P. TO 40 PSID 3 H.P. OVER 75 PSID REVERSIBLE
procon 1300水泵
procon 1300水泵
procon 1300水泵PROCON - International Authorized Repair Center PROCON - Représentant Autorisé International www.piecesml.com www.partsml.com ...Web site optimized by Pagina+ ™ from GCIS. Click here for more information. This Web site was designed, built, hosted and is updated by The General Center for Internet Services Inc. Click here to visit our site. Visitez notre site - cliquez ici. Copyright © Parts M.L. Inc. 1981 to 2002. All rights reserved.
pomac卫生级泵
pomac卫生级泵
pomac卫生级泵about Pomacmanufacturinghistorycertificatesorganisationhow to find us Classification of pumps in accordance with the pump principle Centrifugal pumps Lobe pumps Truck pumps Selfpriming pumps Excentric screw pumps De-foaming pumps Liquid ring selfpriming pumps Impeller pumps
albany lobe pump
albany lobe pump
albany lobe pump Contact | Downloads | Site Map | Using this Site Home Products Service Enquiries About Us Rotary Gear Pumps Screw Pumps Centrifugal Pumps Lobe Pumps Albany Pumps manufacture gear, centrifugal, lobe and screw pumps. Supplying new and replacement pumps. Albany also provide a spares service for all of its pumps and a repair service for most makes of pump. Albany is the only genuine manufacturer of Stothert & Pitt pumps using original records, drawings and patterns etc. Refurbishment of Stothert & Pitt pumps to original specifications can be undertaken. Albany are agents for the Leistritz range of screw pumps in England, Wales & Northern Ireland. At the forefront of modern pump technology Albany is constantly providing pumping solutions to major industries as new products and plant installations are developed. As the UK's largest producer of specialist gear pumps, Albany has the capacity to handle large volume contracts as well as singular bespoke applications. With products available from the Brooke, Barclay Kellet, Crown, Handoll, Stanhope and Stothert & Pitt pump ranges there is a wide choice to choose from and a pumping knowledge dating back over 100 years. BS EN ISO 9001 - 2000 REGISTERED COMPANY Links Brochures Access the brochure download page. Help Links to help files for existing customers. June 7, 2006 ?2006 The Albany Engineering Company Limited Church Road, Lydney, Gloucestershire, GL15 5EQ, England Telephone: +44 (0)1594 842275 Facsimilie: +44 (0)1594 842574 Email: sales@albany-pumps.co.uk Free search engine submission and placement services!
ab industrial工业泵
ab industrial工业泵
ab industrial工业泵 Centrifugal Vertical Slurry Mag-Drive & Sanitary Positive Displacement Centrifugal Pumps ANSI B73.1M Slurry/ Dredging Mag-Drive End Suction Machine Tool Vertical Sump Self-Priming Close-Coupled Solids Handling Vortex Submersible Horizontal Split-Case Stainless Steel Multi-Stage API 610 Sanitary Rubber Lined Non-Metallic GOULDS VANTON FLOWSERVE WEIR FYBROC DURCO WARMAN PACER DURIRON ATLAS SETHCO DEAN BAKER GALIGHER SERFILCO PEERLESS ASH CORCORAN SUMMIT GOYNE SIMS GORMAN RUPP GIW FLYGT GODWIN WORTHINGTON ABS PIONEER PACO PUMPEX CH & E ARMSTRONG BJM GRISWOLD TACO ZOELLER UNION WEINMAN MYERS DAVID BROWN B & G TOYO SCOT AURORA FAIRBANKS MORSE PRICE LANCASTER VERTIFLO CARVER MP PUMP SWABY BELL & GOSSETT CRANE DEMING CHICAGO SUNDYNE TEEL HYDRA-TECH GRUNDFOS TRW MISSION BERKELEY NATIONAL OILWELL EBARA MARLOW AMERICAN MARSH G + L A-C ALLIS CHALMERS PEABODY BARNES BLACKMER AMPCO LABOUR STERLING INGERSOLL-RAND RUHRPUMPEN WDM SMART TURNER Site Hosted and Designed by Enter.Net
gusher 7600涂装泵
gusher 7600涂装泵
gusher 7600涂装泵 View Gusher Catalogs Vortex Offering eight different sizes ranging from 2X2-7 to 6X8-15 giving the capability of handling solids up to 6 inches pumping up to 400 foothead and 2800 GPM Click here to receive additional information Send mail to emcarter@gusher.com with questions or comments about this web site. Copyright © 1997 Gusher Pumps. Last modified: March 03, 2006
Fairbanks Morse 消防泵
Fairbanks Morse 消防泵
Fairbanks Morse 消防泵 email:fairbanks_info@pentairpump.com -- Select a Pump Line -- Pump Services Group Turbine Horizontal Split Case Vertical In-Line Propeller Solids-Handling Submers. Solids-Handling - OR - -- Select Market Segment -- Agricultural Commercial Fire Pump Industrial Fire Pump Industrial Power Municipal Ground Water Municipal Water Supply Municipal Lift Stations Municipal Sewage Treatment Distributor Pricing Forms Now Available Anticipation Builds for WEFTEC H2 Optimize Version 8 Announced 1,000,000 Hours - No Lost Time News Archives -------------------------------------------------------------------------------- Copyright 2006 the Pentair Pump Group All Rights Reserved Terms & Conditions/Privacy Policy For over a century, Fairbanks Morse has been manufacturing a wide range of pumps for applications in public works and industrial installations. These include dry pit and submersible solids-handling, dry pit and submersible recessed impeller, vertical line shaft and submersible turbine, mixed-flow and axial-flow propeller pumps, horizontal and vertical split case, a complete line of FM-Approved and UL Listed fire pumps (both electric motor and diesel engine driven), domestic jet and submersible well pumps. Our 400,000 square foot manufacturing facility, located in the heart of the United States, provides advanced engineering and technology, a major testing facility for product performance evaluation, and computerized machining centers for high-quality manufacturing techniques. Fairbanks Morse sales and service facilities are located across the United States and throughout the world. At Fairbanks Morse our longevity, engineered products, R&D programs, market leadership and customer service are the direct result of the quality and dedication of our personnel. Fairbanks Morse's Quality Management System is registered to ISO 9001:2000, certificate number 006845, and we are members of NFPA, WWEMA, SWPA, WEF and the Hydraulic Institute.
myers离心泵
myers离心泵
myers离心泵 USA - 1101 Myers Parkway Ashland, Ohio 44805 • Phone: 419-289-1144 • Fax: 419-289-6658 Canada - 269 Trillium Drive Kitchener, Ontario, Canada N2G 4W5 • Phone: 519-748-5470 • Fax: 519-748-2553 CT Series Centri-Thrift Quick Prime 2C Two Stage I2C Two Stage PB Series Electric Controls Pressure Gauges Valves & Regulators Well Adapters Price Sheets Square D PDF Reader Download Myers offers an extensive line of single and multi-stage centrifugal pumps. Myers centrifugal pumps have earned a reputation for dependable and efficient performance in demanding continuous service applications. Myers offers complete pump and motor assemblies or pump-end kits for mounting to customer supplied motors. Copyright © The Pentair Pump Group All Rights Reserved Privacy Policy - Terms and Conditions of Use By using this site, or by accessing any information on this site, you are agreeing to the Terms and Conditions.
myers离心泵
myers离心泵
myers离心泵 USA - 1101 Myers Parkway Ashland, Ohio 44805 • Phone: 419-289-1144 • Fax: 419-289-6658 Canada - 269 Trillium Drive Kitchener, Ontario, Canada N2G 4W5 • Phone: 519-748-5470 • Fax: 519-748-2553 CT Series Centri-Thrift Quick Prime 2C Two Stage I2C Two Stage PB Series Electric Controls Pressure Gauges Valves & Regulators Well Adapters Price Sheets Square D PDF Reader Download Myers offers an extensive line of single and multi-stage centrifugal pumps. Myers centrifugal pumps have earned a reputation for dependable and efficient performance in demanding continuous service applications. Myers offers complete pump and motor assemblies or pump-end kits for mounting to customer supplied motors. Copyright © The Pentair Pump Group All Rights Reserved Privacy Policy - Terms and Conditions of Use By using this site, or by accessing any information on this site, you are agreeing to the Terms and Conditions.
美国Weinman水泵及密封
美国Weinman水泵及密封
美国Weinman水泵及密封 Circulator --------------- Condensate --------------- End Suction - Flanged - Threaded --------------- Horiz. Split Case --------------- In-Line --------------- Liquid Ring --------------- Non-Clog - Column - Dry Pit - Submersible --------------- Sump - Column - Submersible --------------- Recess Vortex --------------- Vertical Turbine --------------- Accessories __________________ Bilge & Ballast - Barnes - Barnes Canada - Burks - Deming - Prosser - Defense Products --------------- Boiler Blow Down - Barnes - Barnes Canada --------------- Boiler Feed - Barnes Canada - Burks - Deming - Process Systems --------------- Chemical Process - Barnes Canada - Burks - Deming --------------- Condensate Return - Barnes Canada - Burks - Deming - Process Systems - Weinman --------------- Cooling Towers - Barnes Canada - Deming - Process Systems - Weinman --------------- Damage Control - Barnes Canada - Burks - Prosser - Defense Products --------------- Dewatering - Barnes - Barnes Canada - Burks - Crown - Deming - Prosser - Defense Products --------------- Fire Protection --------------- Fluid Transfer - Barnes - Barnes Canada - Burks - Crown - Deming - Process Systems - Prosser - Weinman --------------- Fuel Transfer - Process Systems - Weinman - Defense Products --------------- Hazardous Liquids --------------- Heat Transfer - Deming - Process Systems --------------- High Temperature - Barnes - Barnes Canada - Burks - Deming --------------- HVAC - Barnes Canada - Deming - Process Systems - Weinman --------------- Hydrocarbon Processing - Barnes Canada - Deming --------------- Low Press. Sewers --------------- Nuclear - Defense Products --------------- OEM - Barnes - Barnes Canada - Burks - Crown - Deming - Process Systems - Prosser - Weinman --------------- Salvage - Burks - Process Systems - Defense Products --------------- Septic Tank Sys. - Barnes - Barnes Canada - Barnes PS --------------- Sewage - Barnes - Barnes Canada - Deming - Process Systems - Weinman - Defense Products --------------- Sump - Barnes - Barnes Canada - Burks - Process Systems - Prosser - Defense Products --------------- Tank Cleaning - Sellers - Defense Products --------------- Washdown --------------- Wastewater - Barnes - Barnes Canada - Burks - Crown - Deming - Process Systems - Weinman - Defense Products --------------- Water Transfer - Barnes - Barnes Canada - Burks - Deming - Process Systems - Prosser - Weinman - Defense Products --------------- Water Treatment - Barnes Canada - Burks - Deming - Process Systems __________________ Click here to request your Pump Selection Guide When it comes to general industrial, municipal, commercial and building service pumps, Weinman is widely recognized for quality, efficiency and economy. Weinman pumps are particularly adept in HVAC and water service applications. Weinman pumping equipment and systems are widely found in boiler feed or booster service, chilled or hot water, cooling tower condensate and sprinkler, ice storage and liquid circulation. General water services include potable water transmission, sump and sewage ejection, municipal and industrial water treatment. See the menus at left for specific product and application data. Home | About Us | Employment | Contact Us | Tech Data | Latest News | Site Map Copyright 2000 Crane Pump and Systems All Rights Reserved | Privacy Statement Terms & Conditions
summit泵
summit泵
summit泵 Brochure (2513k) Radial vane impeller with balance holes Interchangeability with existing ANSI pumps Circular non-expanding case Reduced shaft vibration Lower NPSHr Lower seal chamber pressure Extended MTBF on the pump and mechanical seal Additive Chemicals Batch/Continuous Chemical Reactors Chemical Dryers Chemical Process Condensate Service Evaporators Petro Chemical Service Prototype Processes Shower Service Seal Water © 2002 Summit Pump
mack离心泵
mack离心泵
mack离心泵Centrifugal PumpsCentrifugal PumpsPositive Displacement PumpsPositive Displacement PumpsPump ControlsPump ControlsSeals and PackingsSeals and PackingsPump AccessoriesPump AccessoriesLubrications SystemsLubrications SystemsLinecardLinecardPartsPartsPumpsPumps Centrifugal Pumps Goulds Industrial Pumps Pump Selection Software Chemical Process Pumps Sealless Chemical Process Pumps Pulp and Paper Process Pumps API Process Pumps Double Suction Pumps Multi-Stage Pumps Solids Handling Pumps Axial Flow Pumps Vertical Turbine Pumps Sump Pumps Goulds Commercial Pumps G&L Stainless Series Pumps Wastewater Submersible Pumps, Basins and Control Panels Cast Iron and Bronze Fitted Pumps Vertical Lineshaft Turbines Submersible Turbines WEMCO Pumps Self-Priming Solids Handling Pumps Recessed Impeller Pumps Chopper Pumps Hydrogritter Pumps Submersible Pumps Hidrostal Screw Impeller Pumps Roto-Jet Pumps Pilot Tube High Pressure Pumps AC Pumps Fire Pump Packages Horizontal Pumps Vertical Pumps Finish Thompson Pumps Horizontal and Vertical Pumps Drum Pumps Multi Duti Pumps Horizontal Non-Metallic Pumps Pulsafeeder Pumps Eastern Centrichem Pumps Isochem Sealless Pumps Tsurumi Pumps Submersible Pumps Stainless Submersible Pumps Gasoline and Diesel Driven Portable Pumps About Mack Pump Product Catalog Services Surplus Shop News and Events Contact Us ©2005 Mack Pump and Equipment
英国chemquip泵
英国chemquip泵
英国chemquip泵Chemquip Pumps Chemquip has pioneered the design, development and application of Metallic and Fluoroplastic lined Mechanical Sealed and Magnetically Driven pumps used in the harshest corrosive and environmentally-critical services . Twenty Five years of evolution through innovation has created a line of safe, cost-effective pumps and created the customer confidence to keep Chemquip at the forefront of user acceptance. The knowledge developed and the experience gained by Chemquip engineers results in the best pump for the job, chosen from the most comprehensive range of advanced designs and materials for today - and into the future. We understand our pumps will be applied on toxic, explosive and environmentally critical services and aim to reinforce the 'duty of care' our customers have shown in coming to us. To this end, the services required during the life of a pump are all available from Chemquip. This overview provides you with an insight into the current range of Chemquip centrifugal pumps. We also supply all auxiliary products for complete hydraulic solutions. From Variable speed drives to optimise your process and energy-efficiency with the financial burdens of the Climate Change Levy; to valves and control and instrumentation equipment. Materials of Construction DUCTILE CAST IRON STAINLESS STEEL HASTELLOY TITANIUM DCI/PFA DCI/FEP DCI/PVDF DCI/ECTFE DCI/PE DCI/PP DCI/TiNi DCI/SiC CERAMICS Inconel, zirconium, etc PVDF PTFE Fields of Application Conveyance of Corrosive, Environmentally critical, dangerous & pure media in: Chemical Pharmaceutical Petrochemical Pulp Metal Food Processing Waste Disposal, Recycling Industries Mag-drive home Mechanically sealed Variable Speed Drives Reliability, compact size and ease of use make Eco-nome the clear choice of a massive range of AC motor control applications. back to top home -------------------------------------------------------------------------------- Disclaimer Privacy policy © Chemquip Ltd copyright 2004, all rights reserved
dickow泵
dickow泵
dickow泵 HOT OIL PUMPS TYPE NMW / PRMW Back to Oil & Gas • Chemical • General Service -------------------------------------------------------------------------------- • General • Applications • Construction Containment shell Magnetic coupling Internal clearances Containment shell protection Monitoring Outer ball bearings NPSH-Conditions, Inducer Double sleeve bearings Balanced thrust loads • Colour Illustration • Technical Illustration • Performance Tables -------------------------------------------------------------------------------- General Magnetic coupled DICKOW-pumps of the series NMW/PRMW are of sealless design. The containment shell forms a closed system with a hermetically sealed liquid end. back to the menu Applications The magnetic driven NMW/PRMW-pumps are designed for hot oil applications, to improve plant reliability and personnel safety in the Oil & Gas, Petro-chemical, Chemical and Waste Heat Recovery industries. The containment shell replaces any mechanical seal and saves maintenance costs as leaking seals cause 90% of pump failures. NMW/PRMW-pumps offer exceptional benefits to the user and exceed all environmental protection requirements. Maximum operating temperature without water-cooling is 400 degrees C (750 degrees F). back to the menu Construction NMW/PRMW-pumps are single stage volute casing pumps with closed impellers, back-pull-out design, with end suction and top discharge DIN or ANSI flanges. Foot mounted or centreline mounted API 610 / (API 685) design is available. back to the menu Design Features The NMW/PRMW-pumps are designed for operating temperatures up to 400 degrees C. The bearing housing with the cast cooling fins separates the high temperature parts (volute casing, impeller) from the magnet end. This design creates such a temperature difference that 210 degrees C (410 degrees F) in the magnet area will not be exceeded. Cobalt-Samarium magnets can meet 250 degrees C (480 degrees F). The temperature in the magnet end depends also from the magnetic losses in the containment shell. Increase of losses from 2 to 2,9 kW at same pumping temperature creates a temperature rise in the shell from 160 to 210 degrees C (410 degrees F). The pumps can operate with dead ended magnets at losses up to 3 kW. For higher losses (depending on motor rating), an air-cooled heat exchanger is installed. The back vanes of the rotor create a constant cooling flow through the cooler and dissipate the heat from the magnets. back to the menu Containment shell The containment shell is designed as a pressure vessel to separate the pumpage from the atmosphere. The containment shell is bolted to the bearing housing in a manner that allows in-situ removal of the anti-friction bearing bracket without removing the rotating element from the pipework or exposing the pumped liquid to the atmosphere. back to the menu Magnetic coupling The single elements of the multipolar magnetic coupling are manufactured of Cobalt-Samarium (Rare Earth), a permanent magnet material with unlimited life. The internal magnets are completely encapsulated and no contact with the liquid occurs. Energy is transmitted to the hermetically sealed liquid end by a bank of external magnets passing motive force through the sealing shroud to a bank of internal magnets. Inner and outer magnet rings are locked together by magnetic forces and work as a synchronous coupling. The inner magnet ring transmits the required torque direct to the impeller. No slippage occurs between inner and outer magnets. The magnetic drives are designed for electric motors with direct on line starting. Should a subsequent increase of motor power be required, the nominal power of the coupling can be increased by adding further rows of magnets. The maximum transmissible power is 132 kW at 2900 rpm (225 HP at 3500 rpm). back to the menu Internal clearances The internal clearance between inner magnets and containment shell is a minimum of 1 to 2 mm (0.039” - 0.078”). This, together with wear resistant sleeve bearings, allows handling of fluid with solids particles. back to the menu Containment shell protection The different clearances between the rotating outer magnets and stationary containment shell, and the rotating magnet holder and bearing bracket adapter, prevent rubbing of the magnets on the containment shell in the case of ball bearing failure. Ball bearing monitoring devices are available as an option. back to the menu Monitoring Temperature monitoring, power monitoring, dry running protection devices and leakage detection systems are available. Ask DICKOW engineers for further details. back to the menu Outer ball bearings The drive shaft of the NMW-type is carried in generously dimensioned anti-friction bearings, grease filled for life and protected against the environment by radial seal rings. The bearings are located behind the containment shell with C3-clearance and filled with high-temperature grease, type L12. The NMWR/PRMW pumps have the drive shaft carried in oil bath lubricated anti-friction bearings. The bearings are L10 rated for more than 25000 hrs. The oil bath is protected against the atmosphere by a labyrinth seal. The oil level is controlled by a constant level oiler and additionally by a bull's sightglass. Oil mist lubrication is available as an option. back to the menu NPSH-Conditions, Inducer To avoid cavitation, the impellers of the NMW/PRMW pumps are designed to achieve low NPSH-values. For pumps with discharge above 50 mm (2"), an inducer is available for further improvement of NPSH-required conditions. back to the menu Double sleeve bearings The double internal bearings are of the sleeve type, positioned in the pumpage. The stationary bearings are located centrally in the common bearing housing, which ensures proper alignment for true running. Standard material is Silicon Carbide, highly resistant against corrosion and wear. The stationary sleeve bearings, the shaft sleeves and also the start-up rings have SC-parts mounted resiliently to avoid any thermal stress at operating temperature. back to the menu Balanced thrust loads Wear rings, balance holes in the impeller hub and back vanes balance the thrust loads of the closed impellers. Residual forces on the impeller act towards the suction flange. These forces are balanced by the rotor design. The difference between the constant pressure at the rear rotor area and the variable pressure at the front side creates a counter force towards the containment shell. The value of this reaction force depends on the variable gap 'S'. That means that the internal rotor floats until the forces on the impeller and rotor are balanced. The thrust bearings work as start-up rings only. back to the menu -------------------------------------------------------------------------------- Back to Oil & Gas • Chemical • General Service
共10页
[首页][前页]
1
2
3
[后页]
[尾页]
上海宏钲机械设备有限公司
电话:021-52584926 biye77@gmail.com
传真:021-52584992
地址:上海市番禺路390号时代大厦1201室
邮编:200052
网站管理入口
网络推广:
泵阀网
技术支持:
易展
主营产品:
TOHO螺杆泵
PH(ORP)计
搅拌机
气动隔膜泵
TESCOM
压力调压阀