|
|
 |
|
如果您对该产品感兴趣的话,可以 
产品名称:
sensonix pe-8e ph峊惂婍
产品型号:
sensonix pe-8e ph峊惂婍
产品展商:
上海宏钲机械设备有限公司
简单介绍
sensonix pe-8e ph峊惂婍 丂 仭 CHARACTERISTICS
仠 Compact body with DIN96 x 96
pH meter in more compact new size. In depth of 135mm. The limited space can be effectively used.
仠 The measurement value and parameter setting value are indicated simultaneously.
It is convenient for a user that he can identify the measurement value even while setting and calling measurement. This means that a user can operate the model quite easily.
仠 One touch correction
Dip the sensor into a standard solution, and just push a CAL key. Then the micro-processor distinguishes the kind of standard solution, and the judgment function for electric stability makes correction automatically. Additionally, the correction by manual is also available with the change-over switch.
仠 Free power supply
It corresponds with wide range of voltage in AC90V~260V. Therefore, a user is not necessary to pay attention to the voltage in domestic and overseas markets.
仠 Common-usability of pH/ORP meter
With the inside change-over switch, this pH meter can be also used as ORP meter.
仠 Memory back-up system
When the power supply turns off, each setting value and correction value are memorized with backup.
仠 Transmission output is changeable
A user can select the transmission output from pH/8 range or ORP/8 range.
丂 仠 Automatically judges the electrode particularity to be good or bad.
Judging from the electric potential, sensitivity and response-speed at a time of correction, it automatically judges to be good or bad in the electrode. When it is bad, it shows an error message.
It shows error messages when such cases occur as the error beyond the measurement limit, the short of temperature sensor and broken wires.
仠 Simple and certain operation is promised.
In addition to multi-functional faculty, a user can enjoy simplicity in the operation. The display-action works upon the sensibility of human being, which protect from the mis-operation.
仠 Time division ratio
PE-8EP type has the regulatory function of time division ratio in standard specification.
丂
丂 仭SPECIFICATION Model name Digital pH(ORP) Indication Regulatory Meter Digital pH(ORP) Indication Regulatory Meter
Model PE-8E(ON.OFF control) PE-8EP(Time division ratio)
Measurement range PH0乣14丗0.01pH in resolving power
ORP亇1400mV丗1mV in resolving power PH0乣14丗0.01ph in resolving power
ORP亇1400mV丗1mV in resolving power
Recurrence PH亇0.05pH丂ORP亇5mV PH亇0.05pH丂ORP亇5mV
Transmission output DC4乣20mA input/output isolated type
Maximum load resistance : 500, Straight line 亇 0.5%FS DC4乣20mA input/output isolated type
Maximum load resistance : 500, Straight line 亇 0.5%FS
Transmission output range PH丗0乣14 0乣10 0乣8 2乣12 3乣11 4乣14 4乣10 6乣14
ORP丗亇1400mV 亇1000mV 亇700mV 亇3500mV
-1000乣0mV 0乣1000mV -700乣0mV 0乣700mV
(To be selected by the inside change-over switch)
Regulatory Function IC contact output 2 points independent
Capacity : AC250V, 3A max (Resistant load)
Control ON/OFF Upper limit (Hi) or Lower limit (Lo)
(To be selected by the inside change-over switch) IC contact output 2 points independent
Capacity : AC250V, 3A max (Resistant load)
Time division ratio Upper limit (Hi) or Lower limit (Lo)
ON.OFF control (To be selected by the inside change-over switch)
Function of Correction 2 points automatic correction or hand-working correction(To be selected by the inside change-over switch)
Kinds of standard solution : pH4, 7, 9 (JIS)
Additional Functions Such error messages as correction error, electrode error and error beyond the measurement limit are functioned.
Temperature Compensation Element 6.8k兌乮25亷乯 6.8k兌乮25亷乯
Temperature Compensation Range 0乣100亷(In case of ph Meter) 0乣100亷(In case of ph Meter)
Surrounding condition -5乣40亷丂less 85%RH -5乣40亷丂less 85%RH
Power Supply AC90乣260V丂50/60Hz 10W AC90乣260V丂50/60Hz 10W
Structure Panel attachment DIN96亊96丂Indoor installation type丂Case : SPCC Panel : ABS
Outer size 96(W)亊96(H)亊145(D)丂case丗135mm
Weight About 650g
丂
|
sensonix pe-8e ph峊惂婍
的详细介绍 |
sensonix pe-8e ph峊惂婍
 |
丂 |
| 仭 |
CHARACTERISTICS |
| 仠 |
Compact body with DIN96 x 96
pH meter in more compact new size. In depth of 135mm. The limited space can be effectively used. |
| 仠 |
The measurement value and parameter setting value are indicated simultaneously.
It is convenient for a user that he can identify the measurement value even while setting and calling measurement. This means that a user can operate the model quite easily. |
| 仠 |
One touch correction
Dip the sensor into a standard solution, and just push a CAL key. Then the micro-processor distinguishes the kind of standard solution, and the judgment function for electric stability makes correction automatically. Additionally, the correction by manual is also available with the change-over switch. |
| 仠 |
Free power supply
It corresponds with wide range of voltage in AC90V~260V. Therefore, a user is not necessary to pay attention to the voltage in domestic and overseas markets.
 |
|
| 仠 |
Common-usability of pH/ORP meter
With the inside change-over switch, this pH meter can be also used as ORP meter. |
| 仠 |
Memory back-up system
When the power supply turns off, each setting value and correction value are memorized with backup. |
| 仠 |
Transmission output is changeable
A user can select the transmission output from pH/8 range or ORP/8 range. |
|
丂 |
| 仠 |
Automatically judges the electrode particularity to be good or bad.
Judging from the electric potential, sensitivity and response-speed at a time of correction, it automatically judges to be good or bad in the electrode. When it is bad, it shows an error message.
It shows error messages when such cases occur as the error beyond the measurement limit, the short of temperature sensor and broken wires. |
| 仠 |
Simple and certain operation is promised.
In addition to multi-functional faculty, a user can enjoy simplicity in the operation. The display-action works upon the sensibility of human being, which protect from the mis-operation. |
| 仠 |
Time division ratio
PE-8EP type has the regulatory function of time division ratio in standard specification. |
|
|
| 丂 |
|
| 丂 |
仭SPECIFICATION
| Model name |
Digital pH(ORP) Indication Regulatory Meter |
Digital pH(ORP) Indication Regulatory Meter |
| Model |
PE-8E(ON.OFF control) |
PE-8EP(Time division ratio) |
| Measurement range |
PH0乣14丗0.01pH in resolving power
ORP±1400mV丗1mV in resolving power |
PH0乣14丗0.01ph in resolving power
ORP±1400mV丗1mV in resolving power |
| Recurrence |
PH±0.05pH丂ORP±5mV |
PH±0.05pH丂ORP±5mV |
| Transmission output |
DC4乣20mA input/output isolated type
Maximum load resistance : 500, Straight line ± 0.5%FS |
DC4乣20mA input/output isolated type
Maximum load resistance : 500, Straight line ± 0.5%FS |
| Transmission output range |
PH丗0乣14 0乣10 0乣8 2乣12 3乣11 4乣14 4乣10 6乣14
ORP丗±1400mV ±1000mV ±700mV ±3500mV
-1000乣0mV 0乣1000mV -700乣0mV 0乣700mV
(To be selected by the inside change-over switch) |
|
| Regulatory Function |
IC contact output 2 points independent
Capacity : AC250V, 3A max (Resistant load)
Control ON/OFF Upper limit (Hi) or Lower limit (Lo)
(To be selected by the inside change-over switch) |
IC contact output 2 points independent
Capacity : AC250V, 3A max (Resistant load)
Time division ratio Upper limit (Hi) or Lower limit (Lo)
ON.OFF control (To be selected by the inside change-over switch) |
| Function of Correction |
2 points automatic correction or hand-working correction(To be selected by the inside change-over switch)
Kinds of standard solution : pH4, 7, 9 (JIS) |
| Additional Functions |
Such error messages as correction error, electrode error and error beyond the measurement limit are functioned. |
| Temperature Compensation Element |
6.8kΩ乮25亷乯 |
6.8kΩ乮25亷乯 |
| Temperature Compensation Range |
0乣100亷(In case of ph Meter) |
0乣100亷(In case of ph Meter) |
| Surrounding condition |
-5乣40亷丂less 85%RH |
-5乣40亷丂less 85%RH |
| Power Supply |
AC90乣260V丂50/60Hz 10W |
AC90乣260V丂50/60Hz 10W |
| Structure |
Panel attachment DIN96×96丂Indoor installation type丂Case : SPCC Panel : ABS |
| Outer size |
96(W)×96(H)×145(D)丂case丗135mm |
| Weight |
About 650g |
|
 |
丂 |
|
|