|
|
 |
|
如果您对该产品感兴趣的话,可以 
产品名称:
意大利salami齿轮泵
产品型号:
意大利salami齿轮泵
产品展商:
上海宏钲机械设备有限公司
简单介绍
意大利salami齿轮泵 Gear pumps and motors
Gear pumps, motors and dividers in alluminium alloy.
GROUP 1 , 1.5 , 1.6
Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards.
Displacements from 1.1 to 5.5 cm3/rev for 1 PB, from 1.1 to 7.5 cm3/rev for 1.5 P/MB and from 1.4 to 6.1 cm3/rev for 1.6 P/MB.
GROUP 2 , 2.5
Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards.
Displacements from 4.5 to 26 cm3/rev for 2 P/MB and from 16 a 44 cm3/rev for 2.5 P/MB.
GROUP 3 , 3.5 , 4
Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards.
Displacements from 21to 65 cm3/rev for 3 P/MB, from 55 to 87 cm3/rev for 3.5 P/MC and from 68 to 142 cm3/rev for 4 PB.
ADVANTAGES:
Low noise level
Easy combination in multiple units
High efficiency
Considerable reliability
2PZ
Face gear pumps in aluminium alloy, available in European, German and U.S. standards.
Displacements from 5 to 22.5 cm3/rev.
ADVANTAGES:
Important reduction of noise level in comparison with traditional external gear pumps
Especially suitable for all applications where a low noise level is required, such as: AC and DC electro-power units.
Gear pumps, motors and dividers in spheroidal cast iron.
3 HP/M
Gear pumps and motors in spheroidal cast iron.
Displacements from 31 to 90 cm3/rev. Available in U.S. standard.
ADVANTAGES:
Developed for high loads
Oil contamination and non flammable fluids resistant
|
意大利salami齿轮泵
的详细介绍 |
意大利salami齿轮泵
| |
Gear pumps and motors |
| |
Gear pumps, motors and dividers in alluminium alloy. |
| |
|
GROUP 1 , 1.5 , 1.6
Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards.
Displacements from 1.1 to 5.5 cm3/rev for 1 PB, from 1.1 to 7.5 cm3/rev for 1.5 P/MB and from 1.4 to 6.1 cm3/rev for 1.6 P/MB.
|
| |
GROUP 2 , 2.5
Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards.
Displacements from 4.5 to 26 cm3/rev for 2 P/MB and from 16 a 44 cm3/rev for 2.5 P/MB.
|
|
| |
|
GROUP 3 , 3.5 , 4
Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards.
Displacements from 21to 65 cm3/rev for 3 P/MB, from 55 to 87 cm3/rev for 3.5 P/MC and from 68 to 142 cm3/rev for 4 PB.
|
| |
ADVANTAGES:
|
- Low noise level
- Easy combination in multiple units
- High efficiency
- Considerable reliability
|
|
| |
|
| |
|
2PZ
Face gear pumps in aluminium alloy, available in European, German and U.S. standards.
Displacements from 5 to 22.5 cm3/rev.
|
| |
ADVANTAGES:
|
- Important reduction of noise level in comparison with traditional external gear pumps
- Especially suitable for all applications where a low noise level is required, such as: AC and DC electro-power units.
|
|
| |
| |
Gear pumps, motors and dividers in spheroidal cast iron. |
| |
|
3 HP/M
Gear pumps and motors in spheroidal cast iron.
Displacements from 31 to 90 cm3/rev. Available in U.S. standard.
|
| |
ADVANTAGES:
|
- Developed for high loads
- Oil contamination and non flammable fluids resistant
|
|
|
|