|
|
 |
|
如果您对该产品感兴趣的话,可以 
产品名称:
英国crest化工耐酸泵
产品型号:
英国crest化工耐酸泵
产品展商:
上海宏钲机械设备有限公司
简单介绍
英国crest化工耐酸泵
In many instances a standard pump is not necessarily suitable. in these cases we can design and
manufacture a pump system to match the parameters
of the application Listed are just a few of the many 'specials' we have designed for unique applications. Please do not hestiate to ask is you have a problem which does not seem to fit a standard pump design.
SELF PRIMING EMERGENCY SPILL PUMP
A major manufacturer of industrial chemicals required a pump to handle hydrofluoric acid for emergency use only in the case of a road tanker accident.
We provided the solution with an all PTFE pump fitted with a priming chamber (PTFE lined) and driven by a diesel engine. The whole assembly was mounted on a stainless steel carry frame which was easily transported by two men. In this situation the pump was going to run dry so we provided a sacrificial seal component which could be easily and inexpensively replaced.
V-BELT DRIVE & SPECIAL FLANGES
This is one of our standard PPB range pumps which was fitted with an overhead V-belt drive in order to fit into a very restricted access area.
The suction and discharge flanges were altered from the standard so that the Crest pimp could replace an alternative manufacturer without having to alter any pipework. As our pumps are machined from solid we are not constrained by thin walled mouldings. Since we began making pumps in 1973 we have replaced many pumps in this way so saving our customers considerable time and expense by not having to change existing pipework.
PUMP PACKAGED SYSTEMS
One of our customers had a requirement for a pressurised water system, however the water needed to be ultra-pure for cooling a laser.
Our solution was to provide two of our PPM3 stage pumps (duty/standby) fitted with hard faced silicon carbide mechanical seals, pressure switch controlled and mounted on a common skid and complete with pressure sphere, control panel, pipework and valves.
For further information on special applications please contact us
[The company] | [Horizontal Pumps] | [Vertical Pumps] | [Accessories] | [Contact Us]
[Typical Applications] | [Special Applications]
Designed & maintained by TheWebLoft
All technical issues contact support@webloft.net
|
英国crest化工耐酸泵
的详细介绍 |
英国crest化工耐酸泵
|
|
|
In many instances a standard pump is not necessarily suitable. in these cases we can design and
manufacture a pump system to match the parameters
of the application |
Listed are just a few of the many 'specials' we have designed for unique applications. Please do not hestiate to ask is you have a problem which does not seem to fit a standard pump design. |
|
SELF PRIMING EMERGENCY SPILL PUMP
|
A major manufacturer of industrial chemicals required a pump to handle hydrofluoric acid for emergency use only in the case of a road tanker accident.
We provided the solution with an all PTFE pump fitted with a priming chamber (PTFE lined) and driven by a diesel engine. The whole assembly was mounted on a stainless steel carry frame which was easily transported by two men. In this situation the pump was going to run dry so we provided a sacrificial seal component which could be easily and inexpensively replaced. |
 |
|
V-BELT DRIVE & SPECIAL FLANGES
|
This is one of our standard PPB range pumps which was fitted with an overhead V-belt drive in order to fit into a very restricted access area.
The suction and discharge flanges were altered from the standard so that the Crest pimp could replace an alternative manufacturer without having to alter any pipework. As our pumps are machined from solid we are not constrained by thin walled mouldings. Since we began making pumps in 1973 we have replaced many pumps in this way so saving our customers considerable time and expense by not having to change existing pipework. |
 |
One of our customers had a requirement for a pressurised water system, however the water needed to be ultra-pure for cooling a laser.
Our solution was to provide two of our PPM3 stage pumps (duty/standby) fitted with hard faced silicon carbide mechanical seals, pressure switch controlled and mounted on a common skid and complete with pressure sphere, control panel, pipework and valves. |
 |
|
For further information on special applications please contact us
|
|
|
|